Available 24/7

02 9757 4600

Opening doors around the world

NGF System – Frameless Doors

ADIS NGF frameless automatic doors.The introduction of the next generation series of automatic door operators is a major advancement in automatic doors technology in the Australian and global automatic door markets.

ADIS has a wide variety of frameless doors or frameless glass entries that come equipped with advanced door technology.

Frameless doors from ADIS are of slimline modern design aided with the latest digital microprocessor technology along with top energy efficiency.

Sliding Doors-NGF

Frameless Glass Sliding Door Operator

FEATURES

  • Slim line Modern Design
  • Australian Made
  • Designed for new standards
  • Concealed glass top rail
  • High Security electric Locking
  • No Exposed Wiring
  • Energy Efficient

Quiet Operation

Tracking system is dual linear, which is designed for high security and long life service. The carriage assemblies are fitted with unique track wheels that eliminates the possibility of the doors disengagement from the track.

Advanced Technology

ADIS utilizes the latest in digital microprocessor technology, giving the control unit multiple programmable modes including: - provision to interface with builidng security system, monitoring the doors position status, built-in UPS. The microprocessor operating parameters can be adjusted to accommodate various climatic conditions and specific site requirements in relation to speed, braking etc. Safety is a priority: The ADIS microprocessor will automatically reverse operation in both opening and closing should the doors be obstructed. Photo electric safety light cells mounted to focus across the doorway with halt operation immediately upon beam interruption.

Programmable

Optional remote monitoring and control system (MACS) to check door status or make operational adjustments.

Pelmet Hinge

The ADIS pelmet design features a unique interlocking hinge to provide secure closure and maximum cover even when mounted hard up against the ceiling.

High Security Locking

NGA Technical Drawings

ADOBE ACROBAT CAD Drawings
NGF Head Details PDF DWG
NGF Elevation PDF DWG
NGF Cavity PDF DWG
NGF Concealed PDF DWG
NGF no sidelight PDF DWG
NGF on aluminium frame PDF DWG
NGF with toprails PDF DWG

NGA Specifications

TO SPECIFY OUR PRODUCT IN YOUR PROJECT
ARCHITECTURAL SPECIFICATIONS
FOR NGF HEAVY DUTY AUTOMATIC SLIDING DOOR OPERATOR
FOR FRAMELESS GLASS OPERATION:

Click here to download MS-Word Document

Operation

The Automatic Door Operator is to be a fully electric operator, housed in an extruded aluminum low profile transom section (Height 132mm x Width 155mm) the unit shall be Australian made by an Australian owned company, must comply to AS4085-1992, have a class 3 rating, to suit bi-parting or single sliding doors.

a) The equipment will incorporate electronic computerized DC Motor with built-in optical sensor for precise movement, high torque for a maintenance free life.

b) The pelmet shall incorporate an integrated and interlocking hinge for secure closure and maximum cover. The design shall enable the operator to be fitted flush to the ceiling when required, while the pelmet may be opened fully or removed for access.

c) The multifunctional microprocessor control unit shall feature the following:

  • Self-calibrating and programmable modes
  • Fully compensates door weight and friction therefore delivering the optimum force for efficient operation
  • Independent circuits for pressing closed at the end of the closing stroke
  • Provision for full interfacing with all types of building security/alarm systems
  • Open speed control
  • Closing speed control
  • Brake control: preventing the doors from slamming shut
  • End position-damping control for accurate slow down of door movement
  • Built-in UPS (uninterrupted power supply) for continued operation of door under power failure.
  • Option of solar power provision to be included.

d) The tracking system is to be dual linear track designed for accuracy and long service life fitted with anti rise wheels with no possibility of doors disengaging off tracks. The upper track shall be made of harder and stronger alloy and be replaceable. Each track wheel is fitted with track wipers to maintain clean contact.

e) Safety feature: Moving doors will automatically reverse when traveling in either direction, if obstructed, sensitivity setting to be programmable.

f) During a power failure or emergency the fail-safe device will fully open the doors. The fail-secure mode will close and secure the doors until power is restored.

g) Provision for climate control shall be available. Door opening can be restricted from 50% of normal door operation during high winds or low traffic situations.

h) Dual sets of sun resistant P.E. light cells flush mounted in the door jambs will prevent doors from closing if the threshold area is obstructed. Fitting of P.E. light cells will be at 150mm and 600mm from finished floor level.

i) Door drive shall be by way of toothed belt reinforced with fiberglass tensile members, will incorporate nylon facing surface for pulley tooth protection, for silent and service free operation.

Actuation

Actuation shall be one of the following:

  • Microwave sensors
  • Flush mounted sensors
  • Passive infra red sensors
  • Fine line sensors
  • Induction loops
  • Remote control transmitter
  • Key card system.

Functions

The following functions are to be selectable through a wall mounted key switch:

  • Auto: Doors are operated automatically via the movement sensors.
  • Open: Doors maintained in open position continuously.
  • Exit: Doors remain closed activated only by exiting traffic.
  • Lock: Doors remain closed and locked where optional electric lock function has been installed. Exit by way of emergency exit button.

LOCKING Electromechanical
An electric lock option is available to give total security and can be adapted where manual locking can not be achieved, i.e. Frameless toughened Glass Doors. Lock type is the microprocessor controlled electric locking system. The microprocessor monitors all aspects of the locks functions; e.g. To ensure the door is fully closed when the lock is 100% engaged. Terminal outputs are available to signal to security systems both door position and lock status. The microprocessor is also self diagnosing.

OTHER

Maximum opening width - 4000 mm
Maximum door weight - 240 kg
Opening speed, variable - 250-1200 mm/sec
Closing speed, variable - 50-600 mm/sec
Door open dwell time - 0-30 sec
Manual opening/closing force - <30N

INSTALLATION
The operator shall be installed by the manufacturer or the authorized service agent.

WARRANTY
All ADIS units are covered by a 3-year parts warranty and a 12 month labour warranty, an extended warranty plan is available through an optional maintenance agreement.

PROPRIETARY ITEM: NGF system

MANUFACTURER : ADIS Automatic Doors

To inquire about this system, please contact us.

Australian made logo Winners of the Australian Design Award logo. NATA accredited logo

Contact Us

Why Us?

  • Australian made, manufactured locally
  • 30+ years experience
  • Export to 20+ countries
  • Three-year parts warranty
  • Custom made to fit